How to Format a Hard Drive Using the Command Prompt. Or use Computer Management -> Disk Management if you want to remove all partitions on a drive then format it. Remove the old hard drive from the old disk controller, but leave the controller installed. Power on the system, go into the system BIOS. Make sure that in the boot order, the new disk controller is set as the startup device. Save changes to the BIOS, and restart the system. Windows will now start up on your new disk controller & hard drive.
- How To Uninstall Bad Hard Disk Controller Driver From Command Prompts
- How To Uninstall Bad Hard Disk Controller Driver From Command Prompt Download
You can use built-in Windows components such as Command Prompt and File Explorer. Of your internal volume or local disk. Repair corrupted hard drive using disk wipe software. Internal drive. In the Command Prompt, enter the command driverquery. This should bring up a list of drivers installed on the system. Depending on a number of drivers installed, it may take a while for the screen. Part of that 'due diligence' might also involve taking backups and creating a 'recovery' disk - depends on what you are removing. Keep in mind, less complex Devices aren't quite as hard to remove, as there is less configuration information in the Registry, as well as installed apps and less Driver files.
I want to install a Windows service using a Windows command prompt (not the Visual Studio command prompt).
How do I do this?
Navigate to the installutil.exe in your .net folder (for .net 4 it's C:WindowsMicrosoft.NETFrameworkv4.0.30319 for example) and use it to install your service, like this:
Nothing wrong with SC Create command.Just you need to know the correct args :
If the directory's name has a space like
c:program filesabc 123, then you must use double quotes around the path.
It makes things much easier if you set up a bat file like following,
e.g. To install a service, create a 'myserviceinstaller.bat' and 'Run as Administrator'
to uninstall service,
Just add a -u to the installutil command.
Perform the following:
- Start up the command prompt (CMD) with administrator rights.
c:windowsmicrosoft.netframeworkv4.0.30319installutil.exe [your windows service path to exe]
- Press return and that's that!
It's important to open with administrator rights otherwise you may find errors that come up that don't make sense. If you get any, check you've opened it with admin rights first!
To open with admin rights, right click 'Command Prompt' and select 'Run as administrator'.
I must add one more point in this thread. To install/uninstall 64-bit version of assemblies one should use 64-bit version of tool. To install a service, the command should be:
and to uninstall the command should be:
- Run Windows Command Prompt as Administrator
- paste this code:
cd C:WindowsMicrosoft.NETFrameworkv4.0.30319to go to folder
- edit and run this too:
How To Uninstall Bad Hard Disk Controller Driver From Command Prompts
Note: To uninstall:
installutil /u C:ProjectFolderbinDebugMyProject.exe
*.bat file beside of your windows service
exe file for installing with the following context:
*.bat file beside of your windows service
exe file for uninstalling with the following context:
Run each of
bat file as Admin to install or uninstall your windows service.
If you are using Powershell and you want to install .NET service you can use Install-Service module. It is a wrapper for InstalUtil tool.
It exposes 3 commands
- Install-Service - invokes InstallUtil.exe pathToExecutable command
- Install-ServiceIfNotInstalled - first it checks if service isinstalled if not perform the method Install-Service
- Uninstall-Service- it uninstalls service. ServiceName of path to executable can be used.
Code to this module can be viewed here
- start up the command prompt (CMD) with administrator rights.
- Type c:windowsmicrosoft.netframeworkv4.0.30319installutil.exe [your windows service path to exe]
- Press return
the following code , install and uninstall the Service,
Open the command prompt and run the program as an administrator and fire the below command and press enter.
eg :Our PathInstallUtil.exe C:MyFirstServicebinDebugMyFirstService.exe
How To Uninstall Bad Hard Disk Controller Driver From Command Prompt Download
eg : Our path InstallUtil.exe -u C:MyFirstServicebinDebugMyFirstService.exe
for more help you can see the following link: sample program
Open Visual studio and select new project by selecting
Windows Service template in
Windows Desktop tab. Than copy following code into your service_name.cs file.
Right-Click on service_name.cs file and open designer of service. than right-click and select
Add Installer. than right-click on
serviceProcessInstaller1 and change its property value of
static void main method from
Program.cs file.Than save and Build your project.
binDdebug folder of your project folder. Than open Properties of your
service_name.exe file. Than goto
Compatibility tab. Than click on
Change Settings For All Users.
Run this program as an administrator.
Now, You have to open CommandPromt as Administrator.After open, set directory to where your
InstallUtil.exe file is placed.for ex:
C:WindowsMicrosoft.NETFramework64v4.0.30319.now write the following command:
Note: -i is for install he service and -u for Unsinstall.
after -i set the write the path where you want to install your service.
now write the command in CommandPromt as follows:
stop for stop the Service.
ViewEventLog.exe. Select Windows Logs>Application. There you can check your Service's log by start and stop the service.
when your assembly version and your Visual studio project Biuld setting on dot net 2 or 4 install with same version.
install service with
installutil that same version
if build in dot net 4
if build in dot net 2
You should open command prompt, go to
C:windowsmicrosoft.netframeworkv4.0.30319InstallUtil.exe -i '.EXE file of window service'