HP ProLiant servers and blades are a mainstay in the data center. The market leader for some years with good reason, ProLiant technology represents a remarkably stable continuum of server hardware management tools. HP SmartStart CDs and DVDs have been used countless times since Compaq ProLiant days to accelerate and standardize server deployments by integrating the right HP drivers and utilities into the OS installation process.
- Hp Server G6 Hp Smart Array Sas/sata Controller Driver 2012r2 Download
- Hp Server G6 Hp Smart Array Sas/sata Controller Driver 2012r2 Update
- Hp Server G6 Hp Smart Array Sas/sata Controller Driver 2012r2 Windows 7
- Hp Server G6 Hp Smart Array Sas/sata Controller Driver 2012r2 Version
No SmartStart for HP Gen8 ProLiant, Windows Server 2012
Windows Server 2012 and SAS/SATA controller drivers. Question - I am upgrading the firmware/software on a DL380 g6 running WS2012, and I have a question on one of the updates to install using the Updated HP PSP for Windows Server 2012. Microsoft Virtual Drive Enumerator Driver HP Dynamic Smart Array B120i controller driver. HP Dynamic Smart Array B120i SATA RAID Controller driver is a windows driver Common questions. Sep 22, 2012 - on HP ProLiant servers and HP ProLiant server blades, 3rd edition. Storage Spaces does not currently support Smart Array controllers. Management drivers. SAS/SATA Notification Service.
Hp Server G6 Hp Smart Array Sas/sata Controller Driver 2012r2 Download
A hardware migration to the Gen8 ProLiant platform prompted HP to end the SmartStart legacy with version 8.70b (12/2011) being the last media version. HP stated that SmartStart will not be updated beyond version 8.70. SmartStart will still be available on the web for supported ProLiant G7 and earlier servers through their supported end of life. Since Windows Server 2012 was not an operating system choice in SmartStart 8.70, it won't be possible to use SmartStart to install Windows Server 2012.
- Windows Server 2012 and SAS/SATA controller drivers. And I have a question on one of the updates to install using the Updated HP PSP for Windows Server 2012. I am given the option to install the HP ProLiant Smart Array SAS/SATA Controller Driver for Windows Server 2008 x64 Edition. The available version is 22.214.171.124.
- Driver for HP Smart Array P400 controller for Windows Server 2012 can be downloaded from here. The installation package will not allow you to install the driver automatically (from setup), so I have extracted the driver first and updated the Smart Array P400 controller 'manually' from Device Manager.
New Gen8 and later ProLiant servers use a different technique for assisted installation. There is no media kit included with ProLiant Gen8 products. Intelligent Provisioning replaces SmartStart CDs for ProLiant Gen8 servers. The software that came on SmartStart media is now embedded on a flash chip on ProLiant Gen8 servers and Gen8 server blades. The pre-loaded flash chip is bootable when a user presses the F10 key during server boot (POST). The server will then boot to the pre-loaded flash chip and show the Intelligent Provisioning software.
New way to provision HP ProLiant: Smart Update Manager (HP-SUM)
For everyone that does not have ProLiant Gen8 servers, use the Service Pack for ProLiant (SPP) at http://www.hp.com/go/spp to get firmware and software updates, since only Gen8 can use Intelligent Provisioning. You will also need to use the SPP if you are installing Windows Server 2012 on any HP hardware prior to Gen8. There is also a Windows Server 2012 Supplement for Service Pack for ProLiant that includes drivers and software for all ProLiant servers.
A common scenario is that you will install Windows Server 2012 on a pre-Gen8 ProLiant manually, that is, without HP software-assisted installation. Then afterwards you will run the SPP and/or Windows Server 2012 Supplement to install the HP hardware integration features. HP published a 13-page Technical white paper in September 2012 on Windows Server 2012 implementation recommendations, which makes clear that HP supports Windows Server 2012 installation on G7 and Gen8 ProLiant hardware, and also advises which drivers to use and where they are located (SPP or Supplement). Not all ProLiant hardware previous to G7 and Gen8 may be supported by HP drivers and software on Windows Server 2012.Figure A shows the HP Smart Update Manager (HP-SUM) interface running on a freshly installed Windows Server 2012 computer, an older ProLiant G5. HP-SUM will detect the latest editions of the appropriate software and drivers and show whether they are available on the DVD, to download, or in a local repository. This older G5 ended having no driver support for the HP management module, but all other drivers and software installed and worked as expected.